Used Ransomes Super Certes 61 Pedestrian Cylinder mower comes with transport wheels.
With its unrivaled reputation for precision mowing, the Super Certes 61 is ideal for golf greens, cricket squares and grass tennis courts. Its ten blade cutting cylinder delivers 142 cuts per metre ensuring an immaculate uniform finish. Pneumatic transport wheels provide easy transportation between sites and a steel front roller offers the accurate height of cut settings from 3 - 13 mm. To further enhance the quality of cut an optional Verti-Groom can be purchased.
- Height of cut 3mm - 13mm (0.12" - 0.5") or 1.5mm - 11mm (0.06" - 0.5") with thin optional thin bottom blade/bed knife
- Durable steel rollers as standard
- 10 blade cutting cylinder for close clip
- A primary centrifugal clutch is complimented by a secondary plate clutch which enables the roller drive to be disengaged for easy manoeuvrability.
These machines have the optional Verti-Groom kit fitted ( shown in the photos as a silver attachment in the middle of the mower ).
This machine would be considered alongside the Dennis FT510 Cylinder mower, Allett 220 Cylinder mower and the Ransomes Marquis.
This is an amazing price for this machine when you also consider it has the optional Verti-Groom kit fitted and included in this price. The Verti-Groom Kit Accessory alone sells for over £1000.00.
The Ransomes Super Certes is a robustly designed mower for use on golf greens, cricket squares and grass tennis courts and is available in 51cm and 61cm cutting widths. Pneumatic, removable transport wheels are standard for easy transport from site to site. An optional Verti-Groomer further enhances the quality of the cut. A centrifugal clutch with easy engagement makes the machine very easy to use. Honda 4hp engine. An optional brush and comb set is also available.
Engine HondaÂ® GX 120 K1-QX4, single cylinder, air cooled, 4 stroke OHV petrol
Displacement 119 cc
Starting System Recoil, rope type
Power 4 hp @ 3600 rpm
Fuel Capacity 0.55 gal
Drive Clutch Centrifugal
Traction and Cylinder Drive Chain Drive
Rear Drive Roller 2-piece, cast iron with bevel gear differential with independent automotive clutch control
Hand lever and cable operated centrifugal clutch with additional automotive rear roller drive clutch, hand throttle, cylinder drive lever, engine on/off switch and parking brake
Handles Dual height adjustment with ISO mounting
Length 39.4 in.
Transport Width 51: 27.1 in.
61: 31.1 in.
Height 39.4 in.
Weight (inc. grass box) 51: 181 lbs
61: 218 lbs
Cutting Cylinder 51: 10-blade 5 in. diameter
61: 10-blade 5 in. diameter
Width of Cut 20 in. and 24 in.
Height of Cut 0.25 in. to 1.06 in. or with thin bottom blade: 0.06 in. to 0.45 in.
Height of Cut Adjustment 51: Single point control locating in preset conditions
61: Single point hand wheel adjustment
Cylinder to Bottom Blade Tool adjustment
Front Roll Steel
Grass Box Moulded polyethelene
Cutting Rate 51: 11948 sq. ft./h
61: 17868 sq. ft./h
Cutting Frequency 43 cuts/ft
Ground Pressure 51: 3.99 psi
61: 4.55 psi
OPERATOR EAR NOISE LEVELS (SOUND PRESSURE)
51 and 61: 83 dB(A) Â± 1.92 Leq (2006/42/EC)
HAND/ARM VIBRATION LEVELS
51: 4.77 Â± 1.3 m/sÂ²
61: 2.75 Â± 1.3 m/sÂ²
51 and 61: 95 dB(A) Â± 1.92 LWA